Spiroflow Chain Down: Seized Pin Won’t Press Out

Spiroflow chain-driven equipment stopped by a frozen chain pin.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why pins seize solid

Line stalled, production blocked by a pin that won’t move.

Torch risks damage and safety issues under downtime pressure.

Corrosion, wear, and contamination lock pins tight in heavy service.

Why This Happens

Corrosion builds rust between pin and sidebar, seizing contact surfaces. Wear and contamination pack debris into tight tolerances under load cycling. Result: pin freezes solid, blocking disassembly and halting equipment restart.

Why Operators Choose Kingpin Breaker

Removes seized pins without torch or heat

Applies controlled hydraulic force only where needed

Safer removal during urgent field breakdowns

Cuts downtime with fast, repeatable results

Portable design for on-site chain repair

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Chain stalled mid-shift, pin frozen from contamination buildup

Scheduled rebuild blocked by rusted pins refusing to press

Emergency repair needed after overload seized multiple links

Pin won’t budge after extended wet or dusty service

Field splice delayed by corroded pins locking chain ends

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA

Kingpin Breaker is an aftermarket tool compatible with chain systems used on Spiroflow equipment. Not affiliated with Spiroflow.