Field-Ready Hydraulic Chain Pin Removal Tool for Renold Jeffrey Chain
Removing Renold Jeffrey press-fit chain pins during field maintenance and shutdowns.
Removing Pins from Renold Jeffrey Chain
The Kingpin Chain Tool is commonly used when servicing installed Renold Jeffrey engineered chain.
The hydraulic pin removal process applies controlled force without torches, hammering, or sidebar damage.
Why Tool Selection Matters on Renold Jeffrey Chain
Renold Jeffrey engineered-class chains use interference-fit pins to handle shock loads and torque.
Chains like WH132 and WH159 are often serviced in conveyors and elevators without press access.
Forcing pins out with hammers or misaligned presses distorts sidebars and accelerates chain wear.
Why Maintenance Teams Use Kingpin Breaker on Renold Jeffrey Chain
Controlled hydraulic force removes seized pins
No torch or heat near chain joints
Field-ready setup without press access
Maintains alignment through chain joint
Commonly used on WH-series Renold Jeffrey chains
Built to Perform.
PIN LENGTH RANGE
2.25" – 7.8"
INCLUDES MULTI-CHAIN KIT
(2) Pin Cavities, (4) Pushpins, (5) Spacers
DIMENSIONS (Tool Body)
16.5" × 2.5" × 16"
PIN DIAMETER
1.125" and below
HYDRAULIC CYLINDER
15-ton Hand Pump (foot pedal available)
WEIGHT
28 lbs.
Why Maintenance Teams Trust Kingpin Breaker
Fast. Safe. Simple. Versatile.
Fast
Break even the most
stubborn chains in about
two minutes.
Safe
Reduce hand and back injuries — no hammers, torches, or channel locks.
Simple
Lightweight, intuitive design. Set up and service chains immediately.
Versatile
One tool for almost all chain sizes — fits in tight spaces with ease.
How it Works
From Setup to Break in Minutes.
Common Renold Jeffrey Chain Service Scenarios
Removing pins from WH132 chain during conveyor shutdown maintenance
Field replacement of WH159 chain sections with limited press access
Confined elevator head or tail section chain pin removal
Renold Jeffrey chain service during planned or unplanned outages
On-site chain shortening or section replacement in bulk handling systems
Request a Quote
Seized pin? Not for long.
Kingpin Breaker
Make stubborn pins tap out.
Contact
Email: cooper@kingpinbreaker.com
Phone: (262) 781-3870
Location
Wisconsin, USA
Kingpin Breaker is not affiliated with, endorsed by, or sponsored by Renold Jeffrey. All OEM names are used solely to identify compatible chain service applications.