Break Seized Chain Pins Fast — No Torches. No Hammering.

One concise sentence that restates the problem in the buyer’s environment.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Power Plants

Heat, dust, corrosion, and thermal cycling pack the chain tight and lock the pin.

A seized pin under load stalls the conveyor, kills throughput, and creates immediate risk. Heat, dust, corrosion, and thermal cycling force contaminants into the joint, causing the jammed pin and sudden breakdown that halts the plant.

Why This Failure Happens

WH132, WDH159, H-series, and similar engineered-class chains trap ash, fines, and scale inside the bushing, creating abrasive pack-out that locks the pin. Thermal cycling expands and contracts components, driving corrosion and galling into the joint. Load shocks drive the pin deeper into the press-fit, making it impossible to move without hydraulic force.

Why Operators Choose Kingpin Breaker

Faster downtime reduction with hydraulic force

Safer no-torch extraction on jammed pins

Accurate pin alignment prevents side-loading damage

Portable tool reaches congested conveyor areas

Works reliably across WH132, WDH159, H-series

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Jammed WH132 pin frozen by ash and thermal cycling

WDH159 pin seized in hot clinker drag after load spike

H-series apron feeder chain locked by corrosion and scale

Conveyor drive stalled from a frozen master pin under tension

Boiler house ash drag chain jammed after abrasive pack-out

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA