Break Seized Chain Pins Fast — No Torches. No Hammering.

Seized chain pins in port terminal conveyors can halt ship unloading and choke material flow instantly.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Port Terminals

Heat, dust, corrosion, and abrasion pack into the chain joint until the pin seizes solid. Downtime escalates fast as bulk vessels wait and conveyors stall. Hydraulic removal is the only safe, fast way to break the freeze and get the line moving.

Why This Failure Happens

Seized pins occur when WH132, WDH159, and ER864 joints load, heat, and grind under dust, salt air, corrosion, and thermal cycling. Contaminants infiltrate the bushing, gall the pin surface, and lock the joint immobile under tension. Once frozen, the chain binds, drags, and stalls critical port terminal conveying systems.

Why Operators Choose Kingpin Breaker

Cuts downtime fast with no-torch removal

Delivers controlled hydraulic force on frozen pins

Ensures precise alignment for clean pin push-out

Stays field-portable for tight port conveyor access

Handles WH132, WDH159, ER864 and similar chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Ship-loader drag conveyor stalled by a seized WH132 pin

ER864 bucket elevator jammed during vessel offload

WDH159 apron feeder chain frozen after corrosion buildup

Yard transfer conveyor seized joint stopping stacker-reclaimer flow

Salt-air corrosion locking pins on port reclaim conveyor systems

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA