Break Seized Chain Pins Fast — No Torches. No Hammering.

Port Conveyor Chain Jammed — Production Stops Until the Pin Moves

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Jam in Port Conveyors

Salt air, corrosion, and packed debris lock pins solid during heavy load cycles.

Port crews lose hours when chain won’t move, seized under heat, dust, and abrasion.

Hydraulic force is the only safe, fast way to break a jammed pin loose now.

Why This Failure Happens

WH132, WDH110, and ER864 pins seize when salt, dust, and moisture infiltrate the bores and pack tight. Corrosion expands against the bushings while thermal cycling and load shocks gall the pin surfaces. The result is a fully jammed port conveyor chain that will not press out by conventional methods.

Why Operators Choose Kingpin Breaker

Faster repairs with no-torch hydraulic force

Safer work by eliminating open-flame cutting

Accurate pin alignment for controlled pressing

Field-portable setup for tight port deck access

Fits WH132, WDH159, ER864 and similar chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Jammed WH132 pin on ship-loader conveyor after salt-spray corrosion

ER864 chain frozen in reclaim conveyor from packed fines and moisture

WDH159 drag chain seized during high-load berth transfer cycle

Corroded pin bores on dockside apron feeder refusing to press out

Port conveyor chain locked solid after thermal cycling on outdoor runs

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA