Tramco Drag Conveyor Down: Seized Chain Pins Won't Press Out

Seized pins have stopped your Tramco drag conveyor during active operations.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Chain Pins Seize

Line pressure mounts while seized pins block restart and chain repair.

Torching risks damage and safety issues during urgent field breakdowns.

Corrosion, wear, and contamination freeze pins that won't press out manually.

Why This Happens

Corrosion builds over time, locking pins in place. Wear and load cycling deform components, increasing friction. Contamination packs in, causing pins to seize and halt chain movement.

Why Operators Choose Kingpin Breaker

Removes seized pins without torch or heat

Applies controlled hydraulic force safely

Enables faster, safer field repairs

Cuts downtime during breakdowns

Portable design for on-site use

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Urgent rebuild with pins frozen from long-term corrosion

Breakdown shift: chain stalled by packed contamination

Scheduled maintenance delayed by pins that won't budge

Post-overload repair where wear has seized multiple pins

Remote site fix needing quick, no-heat pin extraction

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA

Kingpin Breaker is an aftermarket tool compatible with chain systems used on Pearson equipment. Not affiliated with Pearson.