Hutchinson Chain-Driven Line Down: Seized Pins Won’t Press Out

Your Hutchinson chain-driven equipment is stopped dead by frozen chain pins.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Chain Pins Seize Up

Corrosion and contamination pack around pins until they won’t move.

Wear from constant load cycling locks them solid under pressure.

The line stays down until those stuck pins are forced out.

Why This Happens

Corrosion builds between pin and sidebar, seizing the joint. Contamination and wear debris pack the clearance, preventing rotation. Repeated load cycling cold-welds surfaces, turning removable pins into permanent blocks that halt the entire chain.

Why Operators Choose Kingpin Breaker

No torch required, no heat damage to chain

Controlled hydraulic force presses pins cleanly

Safer removal in confined field locations

Cuts repair time, reduces equipment downtime

Portable design fits real maintenance conditions

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Emergency breakdown with chain jammed mid-run

Scheduled rebuild stalled by multiple frozen pins

Pin won’t press out with shop press alone

Field repair needed without removing full chain

Corrosion-locked pins after extended wet service

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA

Kingpin Breaker is an aftermarket tool compatible with chain systems used on Hutchinson equipment. Not affiliated with Hutchinson.