Break Seized Chain Pins Fast — No Torches. No Hammering.

Frozen chain pins in grain elevators lock the entire system and demand immediate removal.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Freeze in Grain Elevators

Dust, moisture, and corrosion bind heavy chain joints until the pin freezes solid. Thermal cycling tightens the interface and stalls the leg instantly. Production stops the moment frozen pins refuse to move.

Why This Failure Happens

Corrosion, moisture intrusion, and abrasive dust load WH132, WH110, WDH102, and ER864 joints until the pin-to-bushing interface galls and locks. Thermal cycling shrinks clearances and clamps the pin immobile. The frozen joint stops the chain, jams the boot or head, and halts material flow.

Why Operators Choose Kingpin Breaker

Faster frozen-pin removal with zero torch use

Hydraulic force breaks corrosion bonds instantly

Centered alignment prevents tool drift and damage

Portable design reaches tight boot and head sections

Proven on WH132, WH110, WDH102, and ER864 chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin frozen solid after corrosion inside the boot

ER864 pin immobile from dust, moisture, and galling

WH110 pin frozen after winter thermal cycling

WDH102 link seized and stalling the head pulley

Frozen drag chain pin stopping flow during peak harvest

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA