Break Seized Chain Pins Fast — No Torches. No Hammering.

Frac sand conveyor pins stuck during a critical outage.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Frac Sand Conveyors

Frac sand packs tight, grinds surfaces, and drives corrosive abrasion into every joint. Extreme dust, heat, and constant vibration lock chain pins solid. Downtime spikes fast when stuck pins halt the conveyor and crews can’t break them loose.

Why This Failure Happens

WH132, WH157, and WDH-class pins seize when silica fines infiltrate the bushings, creating dense pack-out that loads the joint. Heat and thermal cycling expand the pin and plate bores unevenly, causing mechanical bind. High shock loads from surges deform pin shoulders, locking the chain until the pin is forcibly pressed out.

Why Operators Choose Kingpin Breaker

Faster pin extraction with hydraulic force

Safer, no-torch removal in dusty frac plants

Cleaner alignment prevents side-loading failures

Field-portable system cuts downtime instantly

Works on WH132, WH157, WDH chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pins packed solid with silica fines after a surge event

WDH chain pin frozen from thermal cycling at the dryer discharge

WH157 return conveyor pin seized after shoulder deformation

Drag conveyor pin jammed from heavy abrasive intrusion at load-in

Transfer conveyor pin won’t drive out during emergency teardown

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA