Break Seized Chain Pins Fast — No Torches. No Hammering.

Emergency chain pin failure in fertilizer conveyors demands immediate, no-torch removal.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Fail in Fertilizer Plants

Fertilizer conveyors run hot, dirty, and abrasive, forcing pins to seize under packed corrosion. Heat, dust, and thermal cycling lock WH132 and WDH159 pins solid. Every minute down cuts production and exposes crews to risk until the frozen pin is removed.

Why This Failure Happens

WH132, WDH159, and ER864 pins seize when corrosive fertilizer fines pack into the bushing and gall the pin under load. Heat and thermal cycling drive moisture off, leaving hardened deposits that bond pin to bushing. Shock loads during startup finish the lock-up and stop the conveyor instantly.

Why Operators Choose Kingpin Breaker

Faster emergency recovery with no-torch pin removal

Hydraulic force breaks seized pins instantly on-site

Precision alignment protects chain and hardware

Portable design reaches tight fertilizer conveyor points

Works on WH132, WDH159, and ER864 chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin seized in fertilizer drag conveyor boot section

WDH159 pin frozen from corrosive fines in discharge housing

ER864 pin jammed during hot startup in bulk-load conveyor

Sprocket-side pin won’t press out after thermal cycling lock-up

Chain locked mid-shift due to packed dust and abrasion in drive section

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA