Break Seized Chain Pins Fast — No Torches. No Hammering.

Stuck chain pins in fertilizer bucket elevators lock your leg down and halt production.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Fertilizer Elevators

Fertilizer dust, corrosion, and nitrogen-rich fines pack tight around the pin bores.

Thermal cycling and abrasion weld the pin in place and escalate a stuck chain pin instantly.

Every hour down in a fertilizer operation burns money and compounds safety exposure.

Why This Failure Happens

WH132, WDH159, and ER864 pins seize when corrosive fines infiltrate the bushings and gall the pin under load. Abrasive fertilizer dust fills the clearances, locking the pin against the sidebar. Thermal cycling hardens the contamination pack-out, making hammering or heating useless and dangerous.

Why Operators Choose Kingpin Breaker

Removes seized pins fast without torch exposure

Delivers controlled hydraulic force on every press

Keeps alignment tight for clean, predictable pin movement

Moves easily across boot, head, or field locations

Handles WH132, WDH159, ER864 with no setup hassle

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin fused in boot section after fertilizer corrosion pack-out

WDH159 pin stuck on head shaft during outage with zero spare links

ER864 pin frozen after thermal cycling and wet fertilizer intrusion

Drag take-up jammed when contaminated pin wouldn’t press out

Elevator down because seized link pinned the entire leg column

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA