Break Seized Chain Pins Fast — No Torches. No Hammering.

Fertilizer drag conveyors shut down fast when corrosion locks chain pins solid.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Fertilizer Plants

Corrosive dust, chemical vapors, and constant abrasion attack chain joints. Rust builds, pins gall, and alignment loads freeze them in place. Downtime escalates fast when a seized pin stops the drag line.

Why This Failure Happens

Corrosive fertilizer fines infiltrate WH132, WDH159, and ER864 joints, packing the bushing until rust bonds the pin solid. Thermal cycling and shock loads drive the pin deeper, increasing friction and shear lock. Once seized, the chain stops tracking, stalls under load, and forces an immediate shutdown.

Why Operators Choose Kingpin Breaker

Faster pin release with hydraulic force

Safer removal with zero-torch operation

Cleaner alignment for tight chain pockets

Portable setup for congested conveyor pits

Compatible with WH132, WDH159, ER864

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin seized from corrosion in fertilizer drag boot

WDH159 drive-end pin frozen after chemical pack-out

ER864 pin won’t press out during shutdown inspection

Corroded return-side pin jamming take-up tensioner

Frozen drag pin stopping the discharge scraper line

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA