FEECO Chain-Driven Equipment Seized Pin Removal Tool

Seized pins are blocking your FEECO chain-driven equipment restart right now.

Fast quotes. Faster pin removal.

Request a Quote

Learn How It Works

Why Pins Seize or Stick

Your line is down, production is stalled, and the pin won’t press out. Corrosion, wear, and contamination lock pins in place, turning a quick fix into hours of lost output. Torch methods add fire risk and slow you down even more.

Why This Happens

Chain pins seize from corrosion buildup, abrasive wear, and contamination packing into the joint. Repeated load cycling and thermal expansion further tighten the fit. The result: pins freeze solid, halting equipment until removed.

Why Operators Choose Kingpin Breaker

Removes pins without torch or heat

Delivers controlled hydraulic force

Cuts downtime on active breakdowns

Enables safer field repairs

Portable and service-friendly design

Request a Quote

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

Request a Quote

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Pin won’t budge during scheduled chain replacement

Frozen pin stops conveyor restart after shutdown

Stuck pin delays emergency repair on a full shift

Seized pin blocks bucket elevator reassembly

Jammed pin halts apron feeder during peak production

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA

Kingpin Breaker is an aftermarket tool compatible with chain systems used on FEECO equipment. Not affiliated with FEECO.