Dynamic Air Chain Down: Seized Pins Won't Press Out

Your Dynamic Air chain-driven equipment is stopped by stuck chain pins.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why chain pins seize

Seized pins block chain repair and keep the line down.

Torch cutting risks damage and creates serious safety hazards.

Maintenance teams face intense pressure to restart fast.

Why This Happens

Corrosion, wear, and contamination build up inside pin joints over time. Load cycling and pack-out tighten the fit until pins freeze solid. This stops chain movement and halts equipment operation.

Why Operators Choose Kingpin Breaker

Removes seized pins without torch or heat

Applies controlled hydraulic force for clean extraction

Enables safer repairs in the field

Cuts downtime with fast pin removal

Portable design fits real-world service conditions

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Chain stalled mid-shift with pins that won't budge

Scheduled rebuild blocked by frozen pins under time pressure

Emergency breakdown requiring immediate pin extraction on-site

Pins seized after extended run time refusing standard press

Field repair delayed by stuck pins in hard-to-access areas

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA

Kingpin Breaker is an aftermarket tool compatible with chain systems used on Dynamic Air equipment. Not affiliated with Dynamic Air.