Break Seized Chain Pins Fast — No Torches. No Hammering.

Drag conveyor chain pins seized from cement dust are stopping production and burning hours of outage time.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Cement Plants

Cement dust packs into the pin joints until movement stops under load. Heat, abrasion, and corrosion lock the pin solid. Downtime escalates fast when a seized pin blocks the drag conveyor and crews can’t drive it out safely.

Why This Failure Happens

Cement dust infiltrates WH132, WDH159, ER864 and similar chains, forming packed, abrasive sludge. Load shocks and thermal cycling force this contamination deeper, galling the pin and bushing until the joint seizes. Once seized, the chain won’t articulate, stalls the drag, and the pin will not press out by conventional means.

Why Operators Choose Kingpin Breaker

Faster hydraulic removal cuts costly downtime

No-torch extraction eliminates fire and heat hazards

Precision alignment prevents side-loading damage

Portable setup works anywhere in the plant

Fits common WH132, WDH159, ER864 chains

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Drag conveyor stalled from WH132 pin seized solid with dust

WDH159 pins frozen after thermal cycling near kiln discharge

ER864 chain joint packed with abrasive fines and won’t articulate

Head-end jam where seized pin stops take-up and overloads motor

Emergency repair when manual driving won’t move a dust-locked pin

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA