Break Seized Chain Pins Fast — No Torches. No Hammering.

Cement bucket elevator down with a stuck chain pin that won’t press out.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Cement Elevators

Heat, dust, and abrasive fines pack into the chain bores until the pin locks solid. Cement drag and bucket elevator chains run hot, cycle constantly, and build corrosion that freezes the pin in place. Downtime escalates fast when a stuck pin stalls the entire elevator.

Why This Failure Happens

Cement bucket elevator chains (WH132, WDH159, ER864) trap dust and abrasive fines that compact around the pin and cause galling. Heat and thermal cycling swell the link bores, locking the pin even tighter under load. Corrosion and pack-out prevent any movement, turning a routine changeout into a full-production stoppage.

Why Operators Choose Kingpin Breaker

Cuts downtime with fast hydraulic pin removal

Eliminates torches for safer, cleaner repairs

Aligns precisely on bucket elevator chain assemblies

Portable in tight cement plant maintenance spaces

Works on WH132, WDH159, ER864 without modification

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin frozen after thermal cycling near the kiln transfer point

WDH159 link bores packed with cement dust, pin won’t budge

ER864 bucket elevator flight seized mid-shift during hot-load startup

Stuck master pin halting clinker elevator with full hopper load

Frozen chain pin preventing crew from isolating a failed bucket run

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA