Break Seized Chain Pins Fast — No Torches. No Hammering.

Biomass drag conveyor down with seized chain pins causing immediate shutdown.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Seize in Biomass Conveyors

Biomass systems run hot, dusty, and abrasive, driving corrosion and galling into every joint. Thermal cycling and pack-out lock WH- and WDH-series pins solid. Downtime escalates fast when seized pins stop the drag line.

Why This Failure Happens

WH132, WH157, and WDH110 pins seize when abrasive biomass fines infiltrate bushings, moisture accelerates corrosion, and heat cycles expand and contract link bores. Galling and pack-out wedge pins immobile under load, forcing full conveyor shutdown.

Why Operators Choose Kingpin Breaker

Faster hydraulic force ends seized-pin delays

Zero-torch method eliminates fire and burn risks

Precise pin alignment prevents side-load failures

Field-portable setup minimizes outage duration

Fits WH132, WH157, WDH110 drag chain

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin seized in packed biomass fines at boot section

WDH110 pin frozen after thermal cycling near furnace zone

Drag conveyor stalled from corroded WH157 drive-end pins

Return run jam caused by packed-out links in biomass dust

Headshaft reversal failed due to seized engineered-class pins

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA