Break Seized Chain Pins Fast — No Torches. No Hammering.

Jammed chain pins in biomass conveyors stop production fast and demand immediate, no-torch removal.

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Jam in Biomass Conveyors

Biomass conveyors run hot, dusty, and abrasive, driving corrosion and pack-out that locks pins solid. Downtime escalates fast when a jammed pin stalls the drag chain. Hydraulic removal restores movement without torches in these harsh {{environmental_factors}} environments.

Why This Failure Happens

Biomass drag chains like {{chain_examples}} trap fines that compact around the pin, generating abrasion and corrosion that lock it in place. Thermal cycling swells the knuckle and accelerates galling under load shocks. The result is a fully jammed {{failure_mode}} that will not press out by hand or hammering.

Why Operators Choose Kingpin Breaker

Faster hydraulic force pushes out jammed pins immediately

No-torch method improves safety and prevents equipment damage

Precision alignment protects chain bores and sidebars

Field-portable tool eliminates teardown delays

Works on common {{chain_examples}} across biomass conveyors

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

Jammed WH132 pin in a hot biomass drag conveyor boot section

WDH110 pin locked by corrosion after thermal cycling at the furnace feed

ER864 pin frozen in the drive sprocket during high-load startup

SB102 chain pack-out jamming pins after excessive fines accumulation

Jammed pin preventing take-up travel and shutting down the conveyor line

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA