Break Seized Chain Pins Fast — No Torches. No Hammering.

Emergency Chain Failure Halts Your Asphalt Plant Immediately

Fast quotes. Faster pin removal.

Fast quotes. Faster pin removal.

Why Pins Fail in Asphalt Plants

Heat, dust, abrasion, and thermal cycling drive mix and fines into the joint until the pin locks solid. Downtime escalates fast when contaminants cook in place. A seized pin shuts down production and forces an emergency repair.

Why This Failure Happens

WH132, WDH159, and ER864 chains trap hot mix, fines, and abrasive dust inside tight clearances. Thermal cycling bakes this contamination into a rigid mass that bonds the pin to the bushing and sidebar. Load shocks deform the pin shoulder, locking it immovable and stalling the asphalt plant’s drag or conveyor system.

Why Operators Choose Kingpin Breaker

Cuts emergency downtime with fast hydraulic force

Improves safety by eliminating torch heating

Keeps alignment precise on heavy chain joints

Deploys anywhere with portable pin-press design

Handles WH132 and WDH159 seized pins reliably

Built to Perform.

PIN LENGTH RANGE

2.25" – 7.8"

INCLUDES MULTI-CHAIN KIT

(2) Pin Cavities, (4) Pushpins, (5) Spacers

DIMENSIONS (Tool Body)

16.5" × 2.5" × 16"

PIN DIAMETER

1.125" and below

HYDRAULIC CYLINDER

15-ton Hand Pump (foot pedal available)

WEIGHT

28 lbs.

Why Maintenance Teams Trust Kingpin Breaker

Fast. Safe. Simple. Versatile.

Fast

Break even the most

stubborn chains in about

two minutes.

Safe

Reduce hand and back injuries — no hammers, torches, or channel locks.

Simple

Lightweight, intuitive design. Set up and service chains immediately.

Versatile

One tool for almost all chain sizes — fits in tight spaces with ease.

How it Works

From Setup to Break in Minutes.

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 1

Secure & Align

Secure the chain link and alignpushpin

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 2

Build Pressure

Pump until pressure builds (hand or foot pedal)

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 3

Drive Out Pin

Drive out the pin cleanly — no shock or damage

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

STEP 4

Move & Repeat

Move to the next link and repeat

Real Breakdown Scenarios We Fix

WH132 pin seized in drag conveyor mid-shift

WDH159 pin frozen after overnight thermal cycling

ER864 joint locked with baked asphalt fines

Drag chain seized at drive-end sprocket during peak load

Stuck master pin halting slat conveyor flow and mix output

Request a Quote

Seized pin? Not for long.

Kingpin Breaker

Make stubborn pins tap out.

Contact

Email: cooper@kingpinbreaker.com

Phone: (262) 781-3870

Location

Wisconsin, USA